VideoHelp Forum. Remember Me? Results 1 to 7 of 7. Last edited by Anonymous4; 11th Mar at Reason: Scrubbing myself from the Internet. Despite the fact they are part of JVC's "Pro Line", they are actually pretty lightweight and not very well put together.
They function just fine, but aren't worth the many hundreds of dollars they want for them. Separate components are better, period. I downloaded the manual. It's appears that this machine does have a FR mode. This was probably the last model to have the FR record mode. Some of them have an RS port for computerized control of their functions a useless feature for most people.
Contact Us VideoHelp Top. All times are GMT The time now is All rights reserved. Latest tool updates.
DVDFab K-Lite Codec Pack Standard Video Thumbnails Make The Next Function Memory tells the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. It is possible to use the Mode Lock function. Manual Tracking Your unit is equipped with automatic tracking control.
HI-FI should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio. NOTE: When a new tape is inserted, the unit enters the automatic tracking mode automatically.
The Digital 3-DNR Noise Reduction which cuts noise and enables clear picture reproduction is also linked to this function. You can watch the image on VCR deck in the Progressive scan mode via component video. A Set the Progressive-compatible TV to the component input mode. Each time you press the button, it toggles this function on and off.
It is useful when you require both DVD and tape version of a program you are recording once recording is complete. You may choose to start preparation for the VCR deck first. In whichever case, the recording source selection in step C must be the same. VCR Recording Lamp. D Rewind the tape fully to the beginning and set the VCR deck to the stop mode.
If you start recording immediately after setting the decks to Record Pause mode in step 3, the current selected deck will start recording while the other deck remains in the Record Pause mode. Be sure to wait for about 10 seconds. To resume recording, press 4. D Set the DVD deck to the stop mode. To change the value in 30minute intervals, press and hold w e. If Mode Lock is engaged during Simultaneous Recording, it is not possible to pause or stop the recording.
When recording is started, an index of the first part of recording is automatically recorded. Recording on the DVD deck sometimes may stop or cannot be performed even if there is enough available capacity remaining on the disc. Record safety tab. A Load a cassette with the record safety tab intact. As a guide for picture quality, the bps unit is used to represent how much data can be recorded per second.
The larger this value is, the better the picture quality becomes but more capacity is required for the recording. The recording modes for a 4. Free Rate Function To record the entire program, the unit automatically set the appropriate recording mode depending on the combination of the total time of the program to be recorded and either the remaining disc space or the specified recording time from 60 minutes to minutes.
In order to ensure that the recording fits on the disc, this feature may leave a slight non-recorded section at the end of the disc. There may be some noise and sound disturbance at the point on the disc where the unit switches the mode. The list of disc remaining times for all recording modes appears on the TV screen. Active Video Calibration The Video Calibration checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible playback and recording pictures.
The unit adjusts the playback picture quality based on the quality of the tape in use. Video Calibration is active during automatic tracking. The Video Calibration screen appears blinking on the TV screen. The unit spends approximately 7 seconds assessing the condition of the tape, then begins recording.
It does not work during recording. Once the cassette is ejected, the Video Calibration data is cancelled. The next time the cassette is used for recording, Video Calibration is re-performed. Repeat Recording You can record programs on one tape repeatedly. The tape is automatically rewound to the beginning to continue recording when the end of tape is reached during recording.
The previously recorded programs will be overwritten. During recording, press and hold 4 and 7 on the remote control or 7 on the unit for more than 5 seconds. To make sure you record the desired scene or program in its entirety, first perform the following steps:. The unit then automatically checks the condition of the tape and, after approximately 7 seconds, re-enters Record Pause mode. B Press 4 to start recording. The counter is reset to and shows the exact elapsed time as the tape runs.
You can check the exact time of a recording or playback. You can record up to 99 programs on a disc. Each time a program is recorded on the disc, the information of the program is registered for the Library Database DVD Navi automatically. You can move the arrow to select the desired position on the screen by pressing rt w e on the remote control. Using Library Database DVD Navi system, you can easily modify registered information, edit the program or play list, as well as search for the beginning of each program.
About registration of information The following information is automatically registered for each program when ordinary recording is performed, then stored in an area specified on the unit. Edit Play List Information pg. When the amount of information is at the limits of registration, you cannot record new program any more.
In this case, you need to delete old programs to register new one. Only display for library appears. E Icons Indicate the recording situation for each program. F Recording information for the program indicated by the arrow G Guidance for operations H Operational commands. When you want the plural programs to be played back continuously, press MEMO after selecting the desired program. The numbers of the playback order appear on the index. You can select up to 30 programs.
When you want to correct the order, move the arrow to the desired index and press MEMO. The number disappears and the unit renumbers the other programs automatically. The pictures of the program appear on the left window. New index appears on the right window.
Deleting unnecessary programs after dubbing or other operations can increase remaining time and available recording capacity. For DVD-R discs, although it is possible to delete recorded programs, available recording capacity does not increase. The deleted program is never resumed. Play lists and program information in the units library are also deleted. Repeat this process to complete the name.
You can enter the letters up to You can also enter the new name with the number keys. For example, when you press 2 repeatedly, A, B, C, a, b, c, 2, and then A appear by turns. You can use the following buttons. The message appears for your confirmation. The playback pictures appear in the. The elapsed playing time starts counting with the arrow on IN.
The edit-in time is fixed and the elapsed playing time starts counting again. The edit-out time is fixed. B Press r to select IN, then repeat steps 4 9. All the programs on a disc will be deleted once the disc is formatted even if they are protected titles.
There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. Available recording capacity may not match the deleted part after deletion. B Repeat steps 5 9 as necessary. The Play List It is a collection of the scenes. A play list can be freely edited and played back without ever changing any original recording data. Using the random access of a DVD disc which allows video data to be instantly read no matter where it is on the disc , a play list includes information such as the timer counter for the playback start point and end point, indexes for checking the contents of recorded data, category information, and more.
Playback according to a play list you have created allows you to enjoy various combinations of video images from a single program. The playback pictures appear in the window on the screen. Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out points. The edit-out point must come after the edit-in point. The selected scene is added. B Repeat steps 5 8 as necessary. NOTE: There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited.
The selected scene is moved. B Repeat steps 5 11 as necessary. When you want the plural play lists to be played back continuously, press MEMO after selecting the desired play lists. You can select up to 30 play lists. When you want to correct the order, move the arrow on the desired index and press MEMO.
The number disappears and the unit renumbers the other play lists automatically. B Perform steps 3 to 8 of Modify Index pg. A Perform steps 1 to 3 of Create Play List pg.
B Press rt w e to select one program you want to modify, then press t. C Perform steps 2 to 7 of Modify Program Name pg. C Perform steps 2 to 6 of Modify Category pg. B Repeat steps 5 9. B Press r to select IN, then repeat steps 4 Program information can be registered in the units memory for up to 1, programs. It is helpful when finding out on which disc the desired program is recorded.
DISC No. The sorting order can be switched between ascending order and descending order by pressing the sort buttons. When the disc that contains the selected program is not loaded A screen prompting you to load the designated disc appears. Place the disc whose number is displayed on the screen after pressing ENTER to close the prompt screen.
Then perform steps 1 to 4. NOTE: If a disc registered in the library is recorded or modified on DVD units from other manufacturers, it may become impossible to operate properly. The unit starts playback from the selected item. JPEG files are played back as a slide show at the set intervals. The order of the groups and items shown in steps 4 and 5 may differ from the order shown on your PC.
Name of the inserted disc. The order number appears on the left of the track name. Repeat this step as necessary. To quit the Program Playback, press 8. Repeat playback can be performed if it is set as such on the onscreen bar. It is not possible to select tracks and images simultaneously. It is not possible to select tracks or images in other groups. The order numbers are reset and cleared. Only groups which contain MP3 files appear. Only groups which contain JPEG files appear.
When dubbing a tape-end recorded VHS tape, set the input of this unit to a no signal input before dubbing. If the tape has not been rewound, the VCR deck rewinds the tape automatically. When the VCR deck has finished rewinding, dubbing begins automatically. After dubbing is completed, the VCR deck rewinds the tape automatically.
Dubbing An Entire Cassette with Just Dubbing When using the Just Dubbing function, the unit automatically fastforwards the tape to the end, then rewinds back to the beginning to calculate the total recording time. The unit then automatically sets the appropriate recording mode depending on the total recording time and the available disc space. The superimposed indication during the operation or dubbing is not recorded.
It is not possible to dub a tape with a copy protection signal. If the recording capacity of disc become full, the tape stops automatically. It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing. If the index code is found on a tape, a single title is created.
While creating a title, the dubbing stops and then starts again. The dubbing DUBB. To automatically finalize the disc after dubbing: A Perform steps 1 3 of Dubbing An Entire Cassette in the left column before continuing. Each time the finalized disc is played back, it will be played back in accordance to the setting you have selected during finalization.
When 1 PROG. There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts. To stop dubbing, press 8. Upon completing dubbing, dubbing ends automatically even without pressing 8.
Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment. It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points. You can dub the selected scenes on a DVD disc to the tape, starting and stopping wherever you wish. B Locate the point from where you want to start dubbing, then pause playback by pressing the following buttons: 4, 5, 3, 8, 9.
When the progressive mode is set, the dubbing DUBB. You can select and dub your desired programs on a DVD disc to the tape. Select the programs in the order that you want them to be dub. If you have specified a wrong selection, press MEMO. The number disappears. When all the selected programs have been dubbed, playback on the DVD deck and recording on the VCR deck stops automatically at the same time. The program memory remains even after dubbing is completed. When locating the point where you want dubbing to start, be sure to press 4 then press 9.
There should be at least a one-second interval when pressing these two buttons. The units remote control allows you the limited control of the connected DV camcorder or DV equipment functions during dubbing. To play back frame-by-frame, press 9 to pause playback, then press 9 repeatedly. Each press of 9 advances a frame. To change the playback direction, press 3 or 5.
To [DV IN]. Note that this selection is not available when the source program is recorded in 16BIT 48 kHz mode. Playback on the external DV equipment and recording on the unit should start simultaneously. Both the unit and the external DV equipment pause dubbing. Pressing 9 on the unit also works the same way.
Dubbing copyright guarded programs is not possible. Original DV information such as the recording date and time are not recorded. It is not possible to perform dubbing when the dubbing DUBB. D Press 7 on the unit to start recording. Or while holding 7, press 4 on the remote control. The dubbing starts. E When the dubbing ends, press 8 on the unit, then stop playback on the external DV equipment.
You can use a camcorder as the source player and your unit as the recording deck. For VCR deck only Press 7 and 9 simultaneously to set to record pause mode. For VCR deck only After about 10 seconds, press 4 to start recording. All necessary cables can be obtained from your dealer. Refer to the camcorders instruction manual for operating procedure. The quality of dubbed picture becomes poorer than that of the original. NOTE: When using another recorder as the recording deck, refer to its instruction manual.
Your unit. However, it is not possible to dub copy-protected discs. Then press 8 to stop. NOTE: There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts. Digital audio device MD deck, etc. Each of the units can respond to one of four codes 1, 2, 3 or 4. The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals. You can easily modify your unit to respond to 1, 2 or 4 code signals.
Turn off the TV using its remote control. Once you have set the remote control to operate the TV, you do not have to repeat this step until you replace your remote controls batteries. Some brands of TVs have more than one code. If the TV does not function with one code, try entering another. Once you have set the remote control to operate the cable box or DBS receiver, you do not have to repeat this step until you replace your remote controls batteries.
Some brands of cable box or DBS receiver have more than one code. If the cable box or DBS receiver does not function with one code, try entering another. The number keys may not function with some cable boxes. Its not possible to operate a cable box or DBS receiver that is not equipped with a receiving window. Its not possible to set the remote control for both your cable box and a DBS receiver at the same time. You can only set the remote control to operate one of these units at a time.
This unit has a dynamic range of more than dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier.
A sudden surge in the input level to the speakers may damage them. Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the playback picture.
Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu for details on each menu, see pages 58 through 59 , then follow the procedure below.
This function takes no effect on programs other than that recorded in Dolby Digital format. This function does not work when Simulated Surround Effect is activated. LOW: The output level of analog audio is lowered. OFF: To turn off superimposed indications. AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation. For details, refer to Edit Library Information pg. DIM: To dim the front display panel.
During Power Save mode, it is not possible to engage the Tray Lock function. For details, refer to On-screen Language Set pg. ON: You can start playback from the resume point of the placed disc.
This function allows you to select the position to stop dubbing when performing manual dubbing from the VCR deck to DVD deck. The unit automatically calculates the total recording time of the cassette and sets the appropriate recording mode depending on the calculated time and the available disc space.
To change the settings of these modes, find the desired mode in the menu for details on each menu, see pages 60 through 61 , then follow the procedure below. Check the recording quality before you start important recordings.
If playback picture becomes blurred or interrupted, use a cleaning cassette. In the variable speed search, still, slow-motion or frame-by-frame playback modes pg. If these modes are performed frequently on a tape recorded using the S-VHS ET function, the tape may be damaged and the picture may be deteriorated. This takes place whenever you play back a tape or start recording after inserting a tape. This feature helps you to adjust the playback picture quality according to your preference.
Normally select AUTO. AUTO: Picture quality is adjusted automatically. EDIT: Minimizes picture degradation during editing recording and playback. SOFT: Reduces image coarseness when viewing overplayed tapes containing a lot of noise.
When this function is set to ON, the TV screen becomes all blue when there is no signal input from the external input. NOTE: When you want to receive an unstable external input with poor signals,. Then, insert a cassette marked S-VHS. The S-VHS indicator lights up on the front display panel. The S-VHS recording mode is selected. When you finish viewing a tape, be sure to set this function to OFF.
Regardless of the setting, this function has no effect during recording and during special effects playback. The on-screen display may jitter vertically when this function is set to ON. To watch recordings with close-caption, set this function to OFF. The S-VHS indicator goes off. The VHS recording mode is selected.
However, when ON is selected, the counter display pg. During playback, the operation mode indicators may be disturbed depending on the type of tape being used. This unit considers 1-second unrecorded portion as the recording end. When the returning point is reached, playback stops and the cassette will be automatically rewound.
NOTE: The setting you have made is kept in memory. Even if this unit is unplugged or power failure occurs, it will resume every time you turn on this unit. When this function is set to OFF, recording can be done onto a cassette with its record safety tab removed.
The setting you have made is kept in memory. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. When a disc is formatted, all recordings and data are erased. It is impossible to restore them. It is impossible to format Version 1. It is impossible to format DVD-R discs.
Menu screen is cleared. You can select whether to finalize a disc automatically after dubbing. For details, refer to Auto Finalizing pg. It is possible to record on a blank space. It is possible to enter a program title. Marked points marked before finalizing will be deleted, and programs will be divided automatically into chapters approximately every 5 minutes.
In this case, play back the discs on this unit. Additional recordings become impossible. To play back the disc, press 4. Playback will stop when the disc menu is displayed. The disc will be played repeatedly.
All the titles on the disc will be played back sequentially; playback will stop when the last title is played. When the disc finalization is cancelled, the mode in which the disc was formatted is restored, making the disc recordable. To finalize a disc A Load the disc. During DVD recording or playback. Disc is not loaded. A playback-only disc is loaded.
Disc reading in progress. However, will not be displayed. You can lock the disc tray to prohibit the unwanted disc ejection by children. Turn off the unit. It is therefore advisable to use the Mode Lock function. Video output indicator lights on the front display panel if Progressive scan mode has been established. Interlaced scan mode is the setting at your purchase. Interlaced scan mode might be suitable depending on video material. Scan mode cannot be set while menu screen is displayed.
During playback, recording or in stop mode, press and hold F1 on the remote control for more than 5 seconds. No buttons will function and playback and recording will not be interrupted.
When the unit is in the stop mode, all buttons will not function except 7 and 4. It is also possible to use Mode Lock during Repeat Playback pg. You can turn on the unit; however, it is not possible to turn off the unit thereafter. Only 7 and 4 are functional. Last Function Memory Before disconnecting the AC power plug from the AC outlet, press 1 to turn off the unit, your settings for the following functions are kept in the memory. These settings will resume when the unit is turned on again.
Recording mode pg. Before requesting service for a problem, use this chart and see if you can solve the trouble yourself.
Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. The AC power plug is disconnected from the AC outlet. The remote control code will revert back to its default setting 3. If you had change the remote control code prior to replacing the batteries, you need to set the code again.
The source another video recorder, camcorder has not been properly connected. All necessary power switches have not been turned on. The setting of the input position is inappropriate. There are cases when the operation is prohibited on the disc. Lightning or static electricity may cause malfunction of the unit.
The DVD deck is not selected. Images do not appear on the TV screen. The TV is not set to the AV mode. When interlace scanned program is played back, progressive scan mode is selected. Playback does not start or stop immediately after playback is started by pressing. The disc is loaded upside down. Press and hold x DVD until the disc is ejected. It may take approximately 30 seconds. The disc ejection can be sudden. Take care not to injure your fingers when the disc tray opens.
Images are blurred or distorted when you start High-Speed Search. Playback does not start. Playback does not start when you select a title or a chapter. The Parental Lock is engaged and the disc is rated higher than the set level. The VCR deck is not selected.
The tape will not rewind or fast-forward. The automatic tracking mode is engaged. The video heads may be dirty. Breaks are noticeable in Hi-Fi soundtrack. Whistling or howling is heard from the TV during camcorder recording.
The camcorders microphone is too close to the TV. The TVs volume is too high. The AV input cannot be changed. Recording is in progress. Buttons and controls do not function at all. No disc or a disc not being compatible with the unit is loaded. Load a recordable disc on the unit. The disc is full or does not have enough space for the program to be recorded. Mode Lock is activated. The VCR recording lamp lights up on the front display panel.
The unit is in the Record Pause mode. Recording cannot be made. Camcorder recording is not possible. The camcorder has not been properly connected. The input mode is not correct. The tape is automatically rewound, then the unit is shut off. The end of the tape was reached during recording. Next time make sure you have enough time on the tape to record the entire program. The memory is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough.
The remaining capacity of the memory is not enough for registration for the Navigation system. When an incompatible disc is loaded, 4 has been pressed. Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. Finalizing is not complete since the disc may be dirty or damaged.
Canceling disc finalization is not complete since the disc may be dirty or damaged. A disc that is not registered in the library has been inserted. Register the disc as necessary. Appears when a title that has been selected in the library is not contained in the loaded disc. The number of titles exceeds The number of play lists exceeds When a playback-only disc or a finalized disc is loaded, 7 has been pressed.
An attempt has been made to record copy-protected contents. The unit has detected invalid contents at the start or in the middle of playback. THE i. An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit. Check the connection. A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. The ratio of vertical and horizontal sizes of a displayed image.
The horizontal vs. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function. DVD is specified to have each sound track constitute one sound field. Multichannel refers to a structure of sound tracks having three or more channels. All processing is done in the digital domain.
Not all Dolby Digital discs contain six 5. Internal stereo mix of multichannel surround audio by a DVD player. The down-mix signals are output from stereo output connectors. Refers to the signal recorded on Video CDs for controlling reproduction. By using menu screens recorded on a Video CD that supports PBC, you can enjoy interactive-type software as well as software having a search function.
A Digital Surround audio encoding format configured with six 5. It requires a decoder, either in the player or in an external receiver. Not all DTS discs contain six 5. Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. In the conventional video system, a picture is shown on the display monitor in two halves.
The Interlaced scan system places lines of the second half of the picture in-between lines of the first half of the picture. A system for allowing discs to be played back only in the regions designated beforehand. All the countries in the world are grouped into six regions, each region being identified by a specified Region Code or region number. If the Region Code given to a disc includes a numeral which matches one in the Region Code of a player, the player can play back the disc.
This name has resulted from the screen form looking literally like a letter box. Sampling frequency numerically represents how many times the original analog signal is sampled per second.
A system for converting analog sound signal to digital signal for later processing, with no data compression used in conversion. The rate of transferring digital data. Usually the measure is in baud per second. The DVD system applies a variable transfer rate system for high efficiency. It takes about 10 seconds for the communication to be established after turning on the unit. Stops the selected deck. Resume will be cleared when this is pressed while in the Stop mode.
Searches the specified chapter and starts playback from the beginning. DVD Deck See page 76 for data format. Searches the specified title and starts playback from the beginning. DVD Deck. Issues the same codes as the wired remote control via RSC. Prolonged keypress for VCR deck operations are not allowed. See page 77 for the remote control codes. Activates forward search. For details on the search speed, refer to Variable Speed Search A pg.
VCR Deck: Fast forward. Search Fwd during playback. For details on the search speed, refer to Variable Speed Search pg. Activates reverse search. VCR Deck: Rewind. Search Rev during playback. Functions as a key for advancing FWD a frame.
When this command is received during still mode, the unit advances the still picture by one frame or field in the FWD direction. Functions as a key for reversing REV a frame. When this command is received during still mode, the unit reverses the still picture by one frame or field in the REV direction.
Fwd Shtl: Functions only during playback. Rev Shtl: Functions only during playback. For setting the input, recording mode, audio language selection and subtitle selection. See pages 78 - 80 for data format. The remote control codes for controlling the VTR similar to wired remote control via RSC are as shown in the following table. Error: Issued by the VTR when receiving invalid commands in the context.
In such cases, commands that are sent will not be accepted. However, a return command will be issued but only to the Status Sense. To clear the Error status, perform command 56 Clear. Select Sense: For acquiring the status of the inputs, recording mode, audio language selection and subtitle selection. TC Data Sense: For acquiring the total remaining time in the current recording mode when there is a media in the selected deck.
Date Data Sense. If the status of the VTR matches to that stated in the above tables, the value returned is 1. Otherwise, the value 0 is returned. For acquiring the remaining time in the current recording mode in hours, minutes and seconds for DVD, and hours and minutes for VCR.
CTL Data Sense. Link: 4-pin for DV input Component video output: Y: 1. Design and specifications subject to change without notice. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the mains power cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual. A-B Repeat Playback On-screen bar C Clock Set D Daylight Saving Time F File Structure Of Discs I Index Search L Last Function Memory M Manual Tracking R Random Playback T Tape Position Indicator U Unplayable Discs V Variable Speed Search Open navigation menu.
Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks. Bestsellers Editors' Picks All Ebooks. Explore Audiobooks. Bestsellers Editors' Picks All audiobooks. Explore Magazines. Editors' Picks All magazines. Explore Podcasts All podcasts. Difficulty Beginner Intermediate Advanced. Explore Documents. Uploaded by lindarcm. Did you find this document useful? Is this content inappropriate? Report this Document.
Flag for inappropriate content. Download now. Related titles. Carousel Previous Carousel Next. Jump to Page. Search inside document. Serial No. USE 1. Accessories To avoid personal injury: Do not place this product on an unstable cart, stand, tripod, bracket, or table. Page 5 When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides, on top and at the rear.
Allows operation with a Video CD disc. Allows operation with a DVD-R disc. Allows operation with an Audio CD disc. Allows operation with a disc including MP3 files. Allows operation with a disc including JPEG files. Marks related to video Number of subtitles Number of angles Recorded under the standard aspect ratio Screen includes black bands at the top and the bottom of image which has a standard aspect ratio letter box Video playback is in Wide video mode on wide televisions, but in letter box on televisions with standard aspect ratio.
Page 10 Label side Do not damage the label side, stick paper to or use any adhesives on its surface. Disc Status Indicator When a disc is running, the disc marks rotate. VR Mode Indicator pg. F Input Indicator Indicates the input selected. Lights when a simulated surround effect is set to 3D-ON on the on-screen bar.
Displays number of the title currently being played back. Indicates playback operation status by pictographs. F Title Number L Time Display Displays single title playback elapsed time, single track playback elapsed time, single track remaining time, total elapsed time, total remaining time, and other information in turn.
M Audio Mode Display Displays playback title number during playback, and recording title number during recording. G Chapter Number Displays audio that is being input. Basic Playback 1 Load a disc.
EN Press 2 or 6 during playback. Playback starts. Variable Speed Search During playback, press 5 for forward variable speed search, or 3 for reverse variable speed search.
0コメント